Thursday, February 2, 2012

Stopwatch using 8051 microcontroller (AT89C51) PROJECT

Posted by Unknown at 9:39 PM 0 Comments
8051 Microcontroller (AT89C51) based stopwatchA stopwatch is a timepiece that measures the amount of time between any two occurrences. Usually, at the first occurrence, the stopwatch is started while at the second it is stopped. To use it again, a reset option is also provided with the stopwatch. The total time elapsed can thus be obtained. A stopwatch is very commonly used in racing competitions and other gaming activities. The circuit given here is a digital stopwatch that displays time on four seven segment displays using 8051 microcontroller (AT89C51) .


DESCRIBTION(click here)
  • The stopwatch keeps the track of time the same way as a simple digital clock does. It is basically an up time counter that starts from 00:00. The control options are provided by means of tactile switches which are active low. This circuit uses three such switches for following operations:
    Switch 1 (S1)   :           Start               
    Switch 2 (S2)   :           Stop                
    Switch 3 (S3)   :           Reset              
    Initially when Vcc supply is provided to the circuit, the stopwatch goes in reset mode with 00:00 display state on seven segments. The stopwatch starts running when S1 is pressed. The time is displayed on four seven segments (in common anode configuration) by using the concept of multiplexing. (Also refer Digital Clock) On pressing S2, the stopwatch stops and displays the total time elapsed since the start. It can be taken to reset mode at any instant by using S3.
    The seven segments are interfaced to port P2 of the microcontroller AT89C51 through its data pins (a - h). The enable pins are connected to pins 1-4 of port P1 (P1^0 – P1^3). The switches S1-S3 are connected to pins 5-7 of port P1 (P1^4 – P1^6).

CODE(click here)
  • //Program to make a stopwatch
    
    #include
    #define msec 1
    unsigned int sec1,sec2;
    int sec1_1,sec1_2,sec2_1,sec2_2;
    
    unsigned int digi_val[10]={0x40,0xF9,0x24,0x30,0x19,0x12,0x02,0xF8,0x00,0x10};
    sbit dig_ctrl_1=P1^0;  // Declare the control pins of seven segments
    sbit dig_ctrl_2=P1^1;
    sbit dig_ctrl_3=P1^2;
    sbit dig_ctrl_4=P1^3;
    sbit start_pin = P1^4;  // Start pin to start the watch.
    sbit stop_pin = P1^5;  // Stop pin to stop the watch.
    sbit reset_pin = P1^6;  // Reset pin to reset the watch.
    int s,t;
    
    void mplex_delay(unsigned int time)  // Function to provide a time delay of approximatelty one second using Timer 1
    {
    int i,j;
    for (i=0;i<=time;i++)
      for(j=0;j<=50;j++);
    }
    
    void digi_out(unsigned int current_num)
    {
        P2=digi_val[current_num];
         mplex_delay(msec);
    }
    
    void display(unsigned int dig1,unsigned int dig2)  // Function to display the digits on seven segmnet. For more details refer seven segment multiplexing.
    {
        sec1_2=dig1%10;
    sec1_1=dig1/10;
    sec2_2=dig2%10;
    sec2_1=dig2/10;
    TMOD=0x01;  //Enable Timer 0
    TL0=0xFF;
    TH0=0xDB;
    TR0=1;  // Triger Timer 0
    while(TF0==0)
    {
      dig_ctrl_1 = 1;
      dig_ctrl_2 = dig_ctrl_3 = dig_ctrl_4 = 0;
      digi_out(sec1_1);
      dig_ctrl_2 = 1;
      dig_ctrl_1 = dig_ctrl_3 = dig_ctrl_4 = 0;
      digi_out(sec1_2);
      dig_ctrl_3 = 1;
      dig_ctrl_2 = dig_ctrl_1 = dig_ctrl_4 = 0;
      digi_out(sec2_1);
      dig_ctrl_4 = 1;
      dig_ctrl_2 = dig_ctrl_3 = dig_ctrl_1 = 0;
      digi_out(sec2_2);
    }
    
    TR0=0;
    TF0=0;
    }
    
    void main()
    {
    while(1)
    {
    start:  // Segment to start the stop watch
      start_pin = 1;
      stop_pin = 1;
      reset_pin = 1; 
      dig_ctrl_1 = 0;
      dig_ctrl_2 = 0;
      dig_ctrl_3 = 0;
      dig_ctrl_4 = 0;
      P2 = 0xFF;
      s = t = 0;
      while(start_pin == 1)// Check if start pin is pressed
      {
      display(0,0);
      }
    
    stopwatch:  // Segment to stop the watch
      for (sec1=s;sec1<=99;sec1++)
      {
       if (stop_pin == 0 )  //Check if stop pin is pressed
       break;
        for (sec2=t;sec2<=99; sec2++)
        {
        if (stop_pin == 0 )  //Check if stop pin is pressed
        break;
        t=0;
        display(sec1,sec2);
        }
      }
      stop_pin = 1;
      s = sec1;
      t = sec2;
     
      while ( start_pin != 0 && reset_pin != 0 )  //Check if start pin or reset pins are not pressed
      {
      display(sec1,sec2);
      }
     
      if (start_pin == 0)  //Check if start pin is pressed
      {
      goto stopwatch;
      }
      else
      {
       if (reset_pin == 0 )  //Check if reset pin is pressed
       {
       s = t = 0;
       goto start;
       }
      }
    }
    }
Tags:

Share This Post

Get Updates

Subscribe to our Mailing List. We'll never share your Email address.

0 comments:

THANKS FOR UR COMMENT ....

Categories

Labels

AERONAUTICAL AEROSPACE AGRICULTURE ANDROID Android project titles Animation projects Artificial Intelligence AUTOMOBILE BANK JOBS BANK RECRUITMENTS BIG DATA PROJECT TITLES Bio instrumentation Project titles BIO signal Project titles BIO-TECHNOLOGY BIOINFORMATICS BIOMEDICAL Biometrics projects CAREER CAT 2014 Questions CHEMICAL CIVIL Civil projects cloud computing COMP- PROJ-DOWN COMPUTER SCIENCE PROJECT DOWNLOADS COMPUTER(CSE) CONFERENCE Data mining Projects Data protection. Design projects DIGITAL SIGNAL PROCESSING IEEE Project titles Dot net projects EBOOKS ELECTRICAL MINI PROJECTS ELECTRICAL PROJECTS DOWNLOADS ELECTRONICS MINI PROJECTS ELECTRONICS PROJECT DOWNLOADS EMG PROJECTS employment Engineering projects Exams Facts final year projects FOOD TECHNOLOGY FREE IEEE 2014 project Free IEEE Paper FREE IEEE PROJECTS GATE GAte scorecard GOVT JOBS Green projects GSM BASED Guest authors HIGHWAY IEEE 2014 projects ieee 2015 projects IEEE computer science projects IEEE Paper IEEE PAPER 2015 ieee project titles IEEE projects IEEE Transactions INDUSTRIAL INNOVATIVE PROJECTS INTERFACING IT IT LIST Java projects labview projects LATEST TECHNOLOGY list of project centers Low cost projects m.com MARINE Matlab codes MATLAB PROJECT TITLES MATLAB PROJECTS MBA MBA 2015 projects MCA MECHANICAL MECHANICAL PROJECTS DOWNLOAD MINI PROJECTS modelling projects MP3 MP3 cutter Mp4 Networking topics ns2 projects online jobs PETROCHEMICAL PHYSIOLOGICAL MODELLING projects physiotheraphy Projects Power electronics power system projects PRODUCTION project centers project downloads Prosthesis projects RAILWAY RECRUITMENT 2012 Recent RECENT TECHNOLOGY RECENT TECHNOLOGY LIST RECRUITMENT Rehabilitation projects renewable power respiration projects RESUME FORMAT. Ring Tone Cutter Robotics projects. Robots in medical social network jobs Solar projects Songs Cutter Speech-music separation-Abstract structural engineering TECHNOLOGY technology management TELE COMMUNICATION TEXTILE TOP ENGINEERING COLLEGES Training VLSI

Disclaimer

This blogs is an effort to club the scattered information about engineering and project titles and ideas available in the web. While every effort is made to ensure the accuracy of the information on this site, no liability is accepted for any consequences of using it. Most of the material and information are taken from other blogs and site with the help of search engines. If any posts here are hitting the copyrights of any publishers, kindly mail the details to educations360@gmail.com It will be removed immediately.

Alexa Rank

back to top