GSM Based SMS Driven Automatic Display Toolkit for College Noticeboard (Electronics Project)

The main aim of the project will be to design a SMS driven automatic display toolkit which can replace the currently used programmable electronic display. It is proposed to design receive cum display toolkit which can be programmed from an authorized mobile phone.

The message to be displayed is sent through a SMS from an authorized transmitter. The toolkit receives the SMS, validates the sending Mobile Identification Number (MIN) and displays the desired information after necessary code conversion.

The system is made efficient by using ‘clone’ SIMs of same MIN in a geographical area so that the same SMS can be received by number of display boards in a locality using techniques of time division multiple access. Started of as an instantaneous News display unit, we have improved upon it and tried to take advantage of the computing capabilities of microcontroller. We envision a toolkit that will not only display message but also can be used to do some mechanical work.

Looking into current trend of information transfer in the campus, it is seen that important notice take time to be displayed in the notice boards. This latency is not expected in most of the cases and must be avoided.

It is proposed to implement this project at the institute level. It is proposed to place display boards in major access points. The electronics displays which are currently used are programmable displays which need to be reprogrammed each time. This makes it inefficient for immediate information transfer, and thus the display board looses its importance. The GSM based display toolkit can be used as a add-on to these display boards and make it truly wireless. The display board programs itself with the help of the incoming SMS with proper validation. Such a system proves to be helpful for immediate information transfer.

The system required for the purpose is nothing but a Microcontroller based SMS box. The main components of the toolkit include microcontroller, GSM modem. These components are integrated with the display board and thus incorporate the wireless features. The GSM modem receives the SMS. The AT commands are serially transferred to the modem through MAX232. In return the modem transmits the stored message through the COM port. The microcontroller validates the SMS and then displays the message in the LCD display board. Various time division multiplexing techniques have been suggested to make the display boards functionally efficient. The microcontroller used in this case is Philips P89C51RD2BN. Matrix Simado GDT11 is used as the GSM modem. In the prototype model, LCD display is used for simulation purpose. While implementation this can be replaced by actually display boards.

The results presented in the thesis support the proper functionalities and working of the system. The timing diagram suggests the response of the modem to various AT commands.

Download SMS Driven Electronics Noticeboard Project